Check idle speed and reset if necessary. The pictures are part of description. Operation of the throttle trigger is prevented unless throttle trigger lockout lever is engaged. Accelerate to full throttle to check for smooth transition from idle to full throttle. During acceleration, press trigger gradually for best operating technique.
Clean carbon deposits from screen and muffler components. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler. Install set screw D and tighten clamping screw C. It reaches full throttle in under 1 second and provides up to 1 hour of run time per charge. The following precautions are strongly recommended, because the minimum exposure which might trigger the ailment is unknown. No assembly tools are needed.
When engine starts, return handle slowly. The front handle may need to be re-positionedfor comfortable operation. With zero emissions lower noise and considerably less maintenance. The circle with the slash symbol means whatever is shown within the circle is prohibited. .
Lift the cover from the engine. The following is an explanation of those symbols and key words and what they mean to you. It contains specifications and information for operation, starting, stopping, maintenance, storage and assembly specific to this product. Due to packaging restrictions, installation of the plastic debris shield, nylon line head, and positioning of the front handle are necessary. See Assembly Section for proper adjustment. Shield assembly includes the Cut-OffKnife. Check idle speed and reset if necessary.
Gloves also reduce the transmission of machine vibration to your hands. Read and understand the Safety Manual for complete information on safe operation. Tools required: Cross Head Screwdriver, 3 mm Hex Wrench, Soft Metal Brush, Wooden Carbon Scraper. Trimmer line must be extended to the cut-offknife. They find it relatively fragile.
Also, when grasping, use your whole hand, not just the thumb and index finger. Try to fill each day with jobs where operating the trimmer or other hand-heldpower equipment is not required. To reduce injury risk to operator, helpers, and bystanders, read and understand the Operator's and Safety manuals. This shield must be replaced with the steel shield for blade use. The reviews rough results are presented in the following graph : 0 1 2 3 4 5 6 7 8 9 10 By leaving the mouse on a column for a few seconds, you can see the number of people who voted to make up the score that appears in the horizontal axis. Shipping is non-refundable customer responsible for on returned items. Start engine and run for several minutes to reach operating temperature.
It explains possible hazards involved with the use of Grass Trimmers and Brush Cutters and what measures you should take to make their use safer. Two at the top of the recoil starter, one in the arm rest. Below each task heading are listed the various part numbers required for that task. According to its users, it is efficient. Restart engine if necessary and allow to warm up running at idle for several minutes.
If element is fuel soaked and very dirty, replace. All items are sold as is. Parts Required: None if you are careful. Replacing your string line is as easy as feeding the line into the head and pressing a button. Before adjusting the carburetor, clean or replace the air filter and spark arrester screen. Read and comply with all safety instructions listed in this manual and safety manual.
Install locator screw B and tighten. Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages preceded by symbols or key words. Good used Echo trimmer service manual. Tools required: 203-254mm 8 - 10 in. Both must be read and understood for proper and safe operation. An Emission Control Label is located on the engine.
Instead, try to maintain a straight wrist position. Assemble components in reverse order. Engine exhaust contains poisonous emissions and can cause serious injury or death. Printed in english and spanish. More + Landscapers are demanding more cordless alternatives to gas-powered Landscapers are demanding more cordless alternatives to gas-powered outdoor power equipment.