Every day before you drive, check your tires. Report the fault to a dealer at the earliest opportunity. Each time you fill the tank, record the amount of fuel added in gallons or liters. Check all battery terminals and remove any excessive corrosion before you attach the battery cables. They can slide around and increase the likelihood of injury or death in a collision. The automatic locking mode is not available on the driver safety belt, or the Regular Cab center safety belt. They lift the child up so that the lap belt rests low across the hips and the knees bend comfortably.
Carefully pull the bulb straight out of the socket. Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop. Replacing high-mount brakelamp bulbs The interior cargo lamp if equipped , on vehicles without a rear headliner, will have to be removed from under the high-mount brakelamp assembly located inside the vehicle. Open the tailgate to expose the lamp assembly and remove the two bolts from the tail lamp assembly. Vehicles with a higher center of gravity such as utility and four-wheel drive vehicles handle differently than vehicles with a lower center of gravity. If starting a vehicle with an automatic transmission: Make sure the gearshift is in P Park. Engine oil filler cap 9.
Have the vehicle checked by your authorized dealer. Reverse engineering or disassembly is prohibited. If the system is not reset, it may not provide a low tire pressure warning when necessary. Vehicle line, series, body type 4. Note: In the illustrations, lightning bolts are used to designate the assisting boosting battery.
This damage could allow the wheels to come off while the vehicle is being driven. Always inflate steel carcass tires with a remote air fill with the person inflating standing at a minimum of 12 ft. Move lock control up to engage the childproof lock. If there are less than six strong stations, the system will store the last one in the remaining presets. If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires. These quality products have been specifically engineered to fulfill your automotive needs; they are custom designed to complement the style and appearance of your vehicle.
The vehicle will not be able to maintain high-speed operation and the engine will run rough. These products are available from your authorized dealer. Repeat this procedure for another remote transmitter if desired. Set the fan to the highest speed initially, then adjust to maintain comfort. This feature is especially useful to the driver when towing a trailer.
Note: In the illustrations, lightning bolts are used to designate the assisting boosting battery. Copyright © 2007 Ford Motor Company. Buckle the combination lap and shoulder belt. Press and hold the brake pedal for two 2 seconds, then release. Push in the flasher control and all front and rear direction signals will flash.
When towing, trailer tongue load or king pin weight is also part of cargo weight. Therefore, the vehicle will not be prevented from moving when a rear wheel is lifted, even if the parking brake is applied. If you need to arrange roadside assistance for yourself, Ford Motor Company will reimburse a reasonable amount for towing to the nearest dealership within 35 miles. At this point, the headlamps and park lamps will turn off. To deactivate, turn the screw clockwise until the locking clip moves freely. This may cause damage to the heated grid lines and will not be covered by your warranty. To reset the trip, press and hold the control again until the trip reading is 0.
Tachometer if equipped : Indicates the engine speed in revolutions per minute. Do not touch them after inflation. Do not attach safety chains to the bumper. Clip the end of the belt to the stationary portion of the shoulder belt coming out of the trim panel. When using forward-facing child safety seats in vehicles with only two seating positions so the forward-facing child safety seat cannot be placed in the rear of the vehicle, move the passenger seat as far back from the instrument panel as possible. Also ensure that the block heater, especially the cord, is in good condition before use. Remove the screw and unlatch the battery cover to access the batteries.